View G150XG03V1_3142281.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

g150xg03 v1 ver 0.1 1/30 product specification g150xg03 v. 1 au optronics corporation product specification 15.0 xga color tft-lcd module model name: g150xg03 v.1 approved by prepared by peter ml lee daniel chi gdbd marketing division / au optronics corporation customer checked & approved by www..net
g150xg03 v1 ver 0.1 2/30 product specification g150xg03 v. 1 document version: 0.0 total pages: 30 date: 7/05/2006 product specification 15.0 xga color tft-lcd module model name: g150xg03 v.1 ( ) prelimi nary specifications ( u ) final specifications note: this specification is subject to change without notice. www..net
g150xg03 v1 ver 0.1 3/30 product specification g150xg03 v. 1 contents 1.0 handling precautions.........................................................................................5 2.0 general description............................................................................................6 2.1 display characteristics ..............................................................................................................6 2.2 optical characteristics ...............................................................................................................7 3.0 functional block diagram................................................................................11 4.0 absolute maximum ratings.............................................................................12 4.1 tft lcd module ......................................................................................................................12 4.2 backlight unit ............................................................................................................................12 4.3 absolute ratings of environment ............................................................................................12 5.0 electrical characteristics..................................................................................13 5.1 tft lcd module ......................................................................................................................13 5.2 parameter guideline for ccfl inverter .................................................................................15 6.0 signal characteristic........................................................................................16 6.1 pixel format image ...................................................................................................................16 6.2 input data format .....................................................................................................................17 6.3 signal description ....................................................................................................................18 6.4 interface timing ........................................................................................................................19 6.5 power on/off sequence .......................................................................................................21 7.0 connector & pin assignment..........................................................................22 7.1 tft lcd module ......................................................................................................................22 7.2 backlight unit ............................................................................................................................24 7.3 signal for lamp connector ......................................................................................................24 8.0 reliability...........................................................................................................25 9.0 shipping and packing.......................................................................................26 9-1 shipping label format .............................................................................................................26 9-2 carton package ........................................................................................................................26 10.0 safety...............................................................................................................27 10.1 sharp edge requirements ....................................................................................................27 10.2 materials ..................................................................................................................................27 10.3 capacitors ...............................................................................................................................27 11.0 other requirement.........................................................................................27 11.1 national test lab requirement .............................................................................................27 12.0 mechanical characteristics............................................................................28 www..net
g150xg03 v1 ver 0.1 4/30 product specification g150xg03 v. 1 record of revision version and date page old description new description remark 0.0 2006/06/30 all first edition 0.1 2006/07/04 28, 29, 30 old plot new plot www..net
g150xg03 v1 ver 0.1 5/30 product specification g150xg03 v. 1 1.0 handling precautions 1) since front polarizer is easily damaged, pay attention not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open nor modify the module assembly. 8) do not press or pat the panel surface by fingers,hand or tooling. 9) do not press the reflector sheet at the back of the module to any directions. 10) in case if a module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the ccfl reflector edge. instead, press at the far ends of the ccfl reflector edge softly. otherwise the tft module may be damaged. 11) at the insertion or removal of the signal interface connector, be sure not to rotate nor tilt the interface connector of the tft module. 12) after installation of the tft module into an enclosure (desktop monitor bezel, for example), do not twist nor bend the tft module even momentary. at designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the tft module from outside. otherwise the tft module may be damaged. www..net
g150xg03 v1 ver 0.1 6/30 product specification g150xg03 v. 1 2.0 general description this specification applies to the 15.0 inch color tft/lcd module g150xg03 v1. this module is designed for industrial applications. the display supports the xga (1024 (h) x 768(v)) screen format and 16.2m colors (rgb 6-bits + frc data)/262k (rgb 6-bit) selectable. all input signals are 1 channel lvds interface compatible. this module does not contain an inverter card for backlight. all the design rules of this module can correspond to pswg standared. 2.1 display characteristics the following items are characteristics summary on the table under 25 condition: items unit specifications screen diagonal [mm] 381 (15 ) active area [mm] 304.128 (h) x 228.096 pixels h x v 1024(x3) x 768 pixel pitch [mm] 0.297 (per one triad) x 0.297 pixel arrangement r.g.b. vertical stripe display mode tn mode, normally white white luminance [cd/m 2 ] 250 (typ) @ 6.0ma contrast ratio 500 response time [msec] 12 (typ) (note 1) color saturation 65% ntsc (typ) nominal input voltage vdd [volt] +3.3 v power consumption (vdd line + ccfl line) [watt] 10.7 w (typ.) @6.0ma (gray bar pattern) weight [grams] 1150 (typ) min. typ. max. horizatal(h) 326.0 326.5 327.0 vertical(v) 253.0 253.5 254.0 physical size [mm] depth(d) - - 12.0 electrical interface 1 channel lvds support color 16.2m colors (rgb 6-bit + frc data)/262k(rgb 6-bit) selectable temperature range operating storage (shipping) [ o c] [ o c] 0 to +50 -20 to +60 surface treatment hard-coating (3h), anti-glare treatment rohs rohs compliance note 1 : system should warm up for at least one hour www..net
g150xg03 v1 ver 0.1 7/30 product specification g150xg03 v. 1 l c d m o d u l e pr-880 / bm5a / bm7 module driving equipment measuring distance 2.2 optical characteristics the optical characteristics are measured under stable conditions at 25 (room temperature): item unit conditions min. typ. max. note horizontal (right) cr = 10 (left) 60 60 70 70 - - vertical (up) cr = 10 (down) 55 45 65 55 - horizontal (right) cr = 5 (left) 65 65 75 75 - viewing angle [degree] vertical (up) cr = 5 (down) 65 65 75 75 - contrast ratio normal direction 400 500 - - rising time - 8.5 11 falling time - 3.5 5 response time [msec] rising + falling - 12 - note 1 red x 0.612 0.642 0.672 red y 0.307 0.337 0.367 green x 0.276 0.306 0.336 green y 0.551 0.581 0.611 blue x 0.114 0.144 0.174 color / chromaticity coordinates (cie) blue y 0.071 0.101 0.131 white x 0.283 0.313 0.343 color coordinates (cie) white white y 0.299 0.329 0.359 white luminance @ ircfl 6ma (center) [cd/m 2 ] 200 250 - luminance uniformity [%] 75 80 note 2 crosstalk (in 75hz) [%] 1.2 1.5 note 3 flicker db -20 note 4 equipment: pattern generator, power supply, digital voltmeter, luminance meter (pr 880, bm-5a , bm 7 ,cs-1000, ca210, sr_3 & ez contrast(eldim)* ) aperture 1 with 50cm viewing distance test point center (vesa point 9) environment < 1 lux * ez contrast is a different measurement tool with very close viewing distance. www..net
g150xg03 v1 ver 0.1 8/30 product specification g150xg03 v. 1 note 1: definition of response time the output signals of photo detector are measured when the input signals are changed from full black to full white (rising time), and from full white to full black (falling time), respectively. the response time is interval between the 10% and 90% of amplitudes. note 2: brightness uniformity of these 9 points is defined as below % 100 9) - (1 points 9 in luminance maximum 9) - (1 points 9 in luminance minimum uniformity = 50 % 90 % 90 % 50 % 10 % 10 % 100 90 10 0 % optical response white black white tr f tr r 100 90 10 0 % optical response white black white tr f tr r www..net
g150xg03 v1 ver 0.1 9/30 product specification g150xg03 v. 1 note 3: crosstalk is defined as below : unit: percentage of dimension of display area l l a -l a l / l a x 100%= 1.5% max., l a and l b are brightness at location a and b l l b -l b l / l b x 100%= 1.5% max., l a and l b are brightness at location a and b note 4: test paterm: subchecker pattern at 127 gray level r g b r g b r g b r g b r g b r g b 0 gray level 1/2 1/2 1/6 1/6 a b 1/2 1/2 1/6 1/6 2/3 1/3 1/3 2/3 a b 184 gray level 184 gray level gray level = l127 gray level = l0 30 a fft 0 a sub checker pattern ca210 30mm www..net
g150xg03 v1 ver 0.1 10/30 product specification g150xg03 v. 1 level dc hz) 30 level(at ac log 20 (db) flicker = amplitude time dc ac www..net
g150xg03 v1 ver 0.1 11/30 product specification g150xg03 v. 1 3.0 functional block diagram the following diagram shows the functional block of the 15.0 inches wide color tft/lcd module: cwy20g C a0g16 / msb240420 jst-bhr-03vs-1 mating type : hrs df14-20s-1.25c sm02(8.0)b-bhs-1-tb 2 ccfl c o n n e c t o r dc/dc converter lvds receiver timing controller gamma correction tft-lcd 1024(3)*768 pixels x - driver ic y - d r i v e r i c g1 g768 d1 d3072 inverter dc power au asic rsds transmitte r lvds + 3.3v g a t e d r i v e r i c source driver ic www..net
g150xg03 v1 ver 0.1 12/30 product specification g150xg03 v. 1 4.0 absolute maximum ratings absolute maximum ratings of the module are as below: 4.1 tft lcd module item symbol min max unit conditions logic/lcd drive vdd 0.3 +3.6 [volt] note 1,2 4.2 backlight unit item symbol min max unit conditions ccfl current ircfl - 7 [ma] rms note 1,2 4.3 absolute ratings of environment item symbol min max unit conditions operating temperature top 0 +50 [ o c] note 3 operating humidity hop 8 90 [%rh] note 3 storage temperature tst -20 +60 [ o c] note 3 storage humidity hst 8 90 [%rh] note 3 note 1: with in ta (25 ) note 2: permanent damage to the device may occur if exceed maximum values. note 3: please refer to the graph below for corresponding of temperature and humidity." www..net
g150xg03 v1 ver 0.1 13/30 product specification g150xg03 v. 1 5.0 electrical characteristics 5.1 tft lcd module 5.1.1 power specification input power specifications are as follows: symbol parameter min typ max units condition vdd logic/lcd drive voltage 3.0 3.3 3.6 [volt] 10% idd vdd current - 600 700 [ma] vin=3.3v , gray bar pattern, at 60hz irush lcd inrush current - - 3 [a] note pdd vdd power 2.0 2.3 [watt] vin=3.3v , gray bar pattern, at 60hz vddrp allowable logic/lcd drive ripple voltage 100 [mv] p-p vin=3.3v , all black pattern, at 75hz note: measurement conditions: +5.0v +12.0v sw vcc r1 47k r2 1k vr1 47k f1 q3 ao6402 g d 2 s d 1 d 5 d 6 c1 1uf/16v q3 ao6402 g d2 s d1 d5 d6 c3 0.01uf/25v c2 1uf/25v (high to low) control signal (lcd module input) 90% 10% vin rising time 0 v 3.3 v 470 us +3.3v www..net
g150xg03 v1 ver 0.1 14/30 product specification g150xg03 v. 1 5.1.2 signal electrical characteristics input signals shall be low or hi-z state when vin is off it is recommended to refer the specifications of sn75lvds82dgg (texas instruments) in detail. each signal characteristics are as follows; symbol parameter min typ max units condition vth differential input high threshold - - 100 [mv] vicm = 1.2v note vtl differential input low threshold -100 - - [mv] vicm = 1.2v note vid input differential voltage 110 400 600 [mv] note vicm differential input common mode voltage 1.1 - 1.45 [v] vth/vtl = 100mv note note: lvds signal waveform v t h vid vicm vss www..net
g150xg03 v1 ver 0.1 15/30 product specification g150xg03 v. 1 5.2 parameter guideline for ccfl following characteristics are measured under a stable condition using an inverter at 25 (room temperature): symbol parameter min. typ. max. unit condition ircfl ccfl operation range 2.5 6 7 [ma] rms (ta=25 o c) note 1, 2 icfl ccfl inrush current - - 20 [ma] fcfl ccfl frequency 40 55 80 [khz] (ta=25 o c) note 3 vicfl (0 o c) (reference) ccfl ignition voltage - 1450 [volt] rms (ta=0 o c) note 4 vicfl (25 o c) (reference) ccfl ignition voltage - 1100 [volt] rms (ta=25 o c) note 4 vcfl ccfl discharge voltage - 590 (@6ma) 710 (@2.5ma) [volt] rms (ta=25 o c) note 5 pcfl ccfl power consumption @7ma(inverter excluded) - 7.1 [watt] (ta=25 o c) note 5 lamp life 40,000 60,000 hrs (ta=25 o c) note 2 ircfl = 6ma note 1 : ircfl is defined as the return current of an inverter. (in fig. 1 ) ( fig. 1 : measurement of return current) a stable ircfl is a current without flicker or biasing waveform provided by inverter that ensures the backlight perform to its specification. the ideal sine waveform should be symmetric in positive and negative polarities and the asymmetry rate of the inverter waveform should be below 10%. it is recommended to use the inverter with detection circuit to avoid overvoltage, overcurrent, or mismatching waveform. the purpose is to avoid current flow into only one of the lamps when the other one is not in operation. note 2: the life time is defined as having expired when the brightness of the ccfl is reduced by half. different inverter designs will result in different input currents, different degrees of leakage, and therefore different impacts on lamp life. concerning the leakage generated from the lcd panel and the inverter, lamp life is defined as ircfl equals 6ma and the input current does not exceed 7ma. note 3 : ccfl frequency should be carefully determined to avoid interference between inverter and tft lcd. note 4 : ccfl inverter should be able to give output a voltage more than 1450 volt. lamp units need 1450 volt minimum for ignition. note 5 : calculator value for reference (ircflxvcflx2=pcfl). inverter lamp hi lo ma + - www..net
g150xg03 v1 ver 0.1 16/30 product specification g150xg03 v. 1 6.0 signal characteristic 6.1 pixel format image following figure shows the relationship of the input signals and lcd pixel format. www..net
g150xg03 v1 ver 0.1 17/30 product specification g150xg03 v. 1 6.2 input data format note1 : please follow pswg. note2 : r/g/b data 7:msb, r/g/b data 0:lsb www..net
g150xg03 v1 ver 0.1 18/30 product specification g150xg03 v. 1 6.3 signal description the module using a pair of lvds receiver sn75lvds82(texas instruments) or compatible. lvds is a differential signal technology for lcd interface and high speed data transfer device. transmitter shall be sn75lvds83(negative edge sampling) or compatible . the first lvds port(rxoxxx) transmits odd pixels while the second lvds port(rxexxx) transmits even pixels. cwy20g-a0d1t (ptwo) or msb240420 (stm) pin no. symbol description 1 vdd power supply, 3.3v (typical) 2 vdd power supply, 3.3v (typical) 3 vss ground 4 vss ground 5 rin0- - lvds differential data input (r0-r5, g0) 6 rin0+ + lvds differential data input (r0-r5, g0) 7 vss ground 8 rin1- - lvds differential data input (g1-g5, b0-b1) 9 rin1+ + lvds differential data input (g1-g5, b0-b1) 10 vss ground 11 rin2- - lvds differential data input (b2-b5, hs, vs, de) 12 rin2+ + lvds differential data input (b2-b5, hs, vs, de) 13 vss ground 14 clkin- - lvds differential clock input 15 clkin+ + lvds differential clock input 16 vss ground 17 rin3- - lvds differential data input (r6-r7, g6-g7,b6-b7) 18 rin3+ - lvds differential data input (r6-r7, g6-g7,b6-b7) 19 vss ground 20 sel68 selection for 6 bits/8bits lvds data input *note1 note1: sel68= high or nc , accept 6 bits lvds data input. sel68= low , accept 8 bits lvds data input. www..net
g150xg03 v1 ver 0.1 19/30 product specification g150xg03 v. 1 6.4 interface timing 6.4.1 timing characteristics basically, interface timings described here is not actual input timing of lcd module but output timing of sn75lvds82dgg (texas instruments) or equivalent. signal parameter symbol min typ max unit clock timing clock frequency clk 50 65 81 mhz horizontal active thd 1024 1024 1024 tclk horizontal blanking thbl 30 320 1024 tclk hsync timing horizontal period th 1054 1344 2048 tck vertical active tvd 768 768 768 th vertical blanking tvbl 8 38 256 th vsync timing vertical period tv 776 806 1024 th note: de mode only note: typical value refer to vesa standard www..net
g150xg03 v1 ver 0.1 20/30 product specification g150xg03 v. 1 6.4.2 timing diagram www..net
g150xg03 v1 ver 0.1 21/30 product specification g150xg03 v. 1 6.5 power on/off sequence vin power and lamp on/off sequence is as follows. interface signals are also shown in the chart. signals from any system shall be hi-z state or low level when vin is off. power sequence timing value parameter min. typ. max. unit t1 0.5 - 10 [ms] t2 0 - 50 [ms] t3 200 - - [ms] t4 100 - - [ms] t5 0 50 [ms] t6 - - 10 [ms] t7 1000 - - [ms] t7 t 5 t2 t3 valid data t1 10% 90% 10% 90% t4 t 6 power supply vdd backlight o www..net
g150xg03 v1 ver 0.1 22/30 product specification g150xg03 v. 1 7.0 connector & pin assignment physical interface is described as for the connector on module. these connectors are capable of accommodating the following signals and will be following components. 7.1 tft lcd module connector name / designation interface connector / interface card manufacturer p-two or compatible type part number cwy20g C a0g16 / msb240420 mating housing part number hrs df14-20s-1.25c pin# signal name pin# signal name 1 vdd 2 vdd 3 vss 4 vss 5 rin0- 6 rin0+ 7 vss 8 rin1- 9 rin1+ 10 vss 11 rin2- 12 rin2+ 13 vss 14 clkin- 15 clkin+ 16 vss 17 rin3- 18 rin3+ 19 vss 20 vss www..net
g150xg03 v1 ver 0.1 23/30 product specification g150xg03 v. 1 7.1.1 connector illustration www..net
g150xg03 v1 ver 0.1 24/30 product specification g150xg03 v. 1 7.2 backlight unit connector name / designation lamp connector manufacturer jst or compatible type / part number bhr-03vs-1 mating type / part number sm02(8.0)b-bhs-1-tb 7.3 signal for lamp connector pin symbol description 1 hv lamp high voltage 2 nc no connection 3 lv ground u cable length: 140 5 mm u connector-output position: right side (front view) u lamp assembly design shall be easy for replacement and repair www..net
g150xg03 v1 ver 0.1 25/30 product specification g150xg03 v. 1 8.0 reliability reliability test condition no test item test condition 1 temperature humidity bias (thb) 50, 80%, 300hours 2 high temperature operation (hto) 50, 300hours 3 low temperature operation (lto) 0, 300hours 4 high temperature storage (hts) 60, 300hours 5 low temperature storage (lts) -20, 300hours 6 thermal shock test (tst) -20 /30min, 60 /30min, 100 cycles 7 on/off test on/10sec, off/10sec, 30,000 cycles 8 shock test (non-operating) 50g, 20ms, half-sine wave (+ x, + y, + z) 9 vibration test (non-operating) 1.5g(10~200hz p- p), 30 minutes each axis (x, y, z) 10 esd (electro-static discharge) contact discharge: 8kv, 150pf(330 ) 1sec, 8 points, 25 times/ point air discharge: 15kv, 150pf(330 ) 1sec, 8 points, 25 times/ point 11 drop test the drop height is 60cm www..net
g150xg03 v1 ver 0.1 26/30 product specification g150xg03 v. 1 9.0 shipping and packing 9-1 shipping label format 9-2 carton package www..net
g150xg03 v1 ver 0.1 27/30 product specification g150xg03 v. 1 10.0 safety 10.1 sharp edge requirements there will be no sharp edges or comers on the display assembly that could cause injury. 10.2 materials 10.2.1 toxicity there will be no carcinogenic materials used anywhere in the display module. if toxic materials are used, they will be reviewed and approved by the responsible auo toxicologist. 10.2.2 flammability all components including electrical components that do not meet the flammability grade ul94-v1 in the module will complete the flammability rating exception approval process. the printed circuit board will be made from material rated 94-v1 or better. the actual ul flammability rating will be printed on the printed circuit board. 10.3 capacitors if any polarized capacitors are used in the display assembly, provisions will be made to keep them from being inserted backwards. 11.0 other requirement 11.1 national test lab requirement the display module will satisfy all requirements for compliance to ul 1950, first edition u.s.a. information technology equipment csa c22.2 no.950-m89 canada, information technology equipment eec 950 international, information technology equipment en 60 950 international, information processing equipment (european norm for iec950) www..net
ver0.1 28/30 12.0 mechanical characteristics www..net
ver0.1 29/30 www..net
ver0.1 30/30 www..net

▲Up To Search▲

Price & Availability of G150XG03V1

	To Download G150XG03V1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .